|
|
|
|
|
| 1936 | |||||
|---|---|---|---|---|---|
|
Production drawing of Abner As visible in the image, there is paper loss 0.25" x 0.5" to the upper left corner with a 0.75” crease and 0.5” tear; these can all be easily matted out. There is paper loss 0.125” x 0.25” to the lower right corner. Piece exhibits slight handling to the upper left side. The size of this piece is 12 Field (11"x13") and the character size is 5.25" h x 6" w. (unframed). WDDCS294 |
|
|||
| 1937 | |||||
|---|---|---|---|---|---|
|
Character study of some bugs As visible in the image, there is some discoloration of the paper and a 2" long fold across the upper left corner and a 1.5" long crease across the lower right corner. There are 2 small tears approximately 0.25" long along the left edge and 3" below the top left corner, 1 tear on the lower edge below the second peg hole to the right, and some minor tears around the left peg hole. There are some miniscule loss of paper at the extreme upper and lower right corners and evidence of pinholes at each upper corner. There is evidence of some stains around the drawings where it was cut and affixed to the production paper, we believe this was caused by the glue used. The size of this piece is 12 Field (11"x13") US$ 1275 (unframed). Add this piece to your collection for only US$255 a month. WDDCS288 |
 |
|||
|
Production drawing of Goofy and Donald Duck The paper has a slight tinge of color change around the outer most edges which can be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 3" h x 6.5" w. US$ 200 (unframed). WDDCS454 |
|
|||
|
Publicity drawing of Goofy Pair of matching drawings used to create a publicity still for the Disney animated short. The pair are creased down the middle as can be seen in the images. The size of this piece is 12 Field (11"x13") US$ 750 (unframed). Add this piece to your collection for only US$150 a month. WDDCR3 |
|
|||
|
Production drawing of Mickey Mouse There are very slight creases along the upper left and right sides which is common for studio-handled production material. The size of this piece is 12 Field (11"x13") and the character size is 3.75" h x 5.5" w. (unframed). WDDCS452 |
|
|||
|
Production drawing of Mickey Mouse and Donald Duck Evidence of slight handling. The size of this piece is 12 Field (11"x13") (unframed). WDDCS229 |
|
|||
|
Production drawing of Mickey Mouse and Donald Duck The paper has had a tinge of color change around the outer edges only which can be easily matted out. There are two tears of 0.25" long in the far right peg hole and a miniscule tear of 0.12" at the upper edge and 1.75" to the left of the upper right corner. There is some surface paper lose along the extreme upper edge. These can all be easily matted out. There is a crease of 1.5" long located 1.0" above the far left peg hole and a crease of 0.75" long located 1.0" above the second to left peg hole. As is common for this type of work, there is signs of handling throughout. The size of this piece is 12 Field (11"x13") and the character size is 10" h x 5" w. (unframed). WDDCS327 |
|
|||
|
Color reference drawing of Mickey Mouse and Donald Duck The size of this piece is 12 Field (11"x13") (unframed). WDD1037 |
|
|||
| 1938 | |||||
|---|---|---|---|---|---|
|
Production drawing of the Marx Brothers There are 3 drawings total. This triple aperture frame measures 18.25" x 47". Price is reflective of the art only--the piece comes with the frame pictured. There is no change in price due to the frame--it can be de-framed upon request at purchase, but it will not change the price of the piece. In the middle drawing of Harpo, there is slight evidence of handling as well as in the drawing on the right. The drawing on the right also exhibits an indentation left from a paper clip. The size of this piece is 12 Field (11"x13") and the character size is 7" h x 4" w. US$ 1200 (framed). Add this piece to your collection for only US$240 a month. WDDNME1 |
|
|||
|
Production drawing of the Marx Brothers The frame measures 16.75" x 16.75". Price is reflective of the art only--the piece comes with the frame pictured. There is no change in price due to the frame--it can be de-framed upon request at purchase, but it will not change the price of the piece. The size of this piece is 12 Field (11"x13") and the character size is 7" h x 4.5" w. US$ 600 (framed). Add this piece to your collection for only US$120 a month. WDDNME3 |
|
|||
|
Production drawing of W.C. Fields Visible only upon close examination is a very light tonality difference around the character most likely from previous matting. The contrast appears to be much harsher on the digital image than it is on the actual piece. There is a tinge of color change along the outer edges of the paper which can be easily matted out. There are some creases of 1"-2.5" at the upper left side and located 2.0" to the left of the character; evidence of handling and can be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 5" h x 3" w. US$ 150 (unframed). WDDCS476 |
|
|||
|
Production drawing of Donald Duck The size of this piece is 12 Field (11"x13") and the character size is 4.25" h x 4" w. US$ 695 (unframed). WDDCS316 |
|
|||
|
Production drawing of Mickey Mouse and Minnie Mouse There is a very faint fold of 1.0" well above the character Minnie and located 4.25" to the left of the upper right corner which can be easily matted out. There is a small fold of 0.25" across the lower left corner and very slight evidence of handling which can be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 6.25" h x 5.75" w. (unframed). WDDCS324 |
|
|||
|
Production drawing of Mickey Mouse and the Giant Mickey narrowly escapes the crushing blow of the Giant’s massive hand and dives into the gaping sleeve of his tunic. The Giant is utterly flummoxed by how quickly the scared little mouse scurries around in this production drawing that is attributed to Bill Tytla. The size of this piece is 12 Field (11"x13") (unframed). WDDCS335 |
|
|||
|
Production drawing of Groucho Marx The size of this piece is 12 Field (11"x13") (unframed). WDD1046 |
|
|||
|
Production drawing of Mickey Mouse There are light pencil marks along the top edge of the drawing, which are easily matted out. There is evidence of slight handling along the right side of the drawing. The size of this piece is 12 Field (11"x13") (unframed). WDDCS388 |
|
|||
|
Production drawing of Mickey Mouse and Minnie Mouse Minnie wraps Mickey in a curtain of kisses as a reward for slaying the giant that terrorized the village. This is a wonderful piece that shows a tremendous amount of interaction from the characters and would be a wonderful addition to any collection! The paper has had a tinge of color change around the outer edges only which can be easily matted out. There is a miniscule tear of 0.12" long to the extreme lower right corner which can be easily matted out. There are faint folds of 1.25" and 1.5" across the lower left corner and 2.0" across the lower right corner which can be easily matted out. There is evidence of very slight handling on the left and right sides and upper corners. The size of this piece is 12 Field (11"x13") and the character size is 4.25" h x 4.75" w. (unframed). WDDCS309 |
|
|||
|
Production drawing of Mickey Mouse Writing at the right of the character reads. " Slow head out 103 1/2." The paper has had a tinge of color change around the extreme outer edges only and there is a minuscule 0.05" x 0.05" area of paper loss at the right edge below the upper right corner, this can all be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 4" h x 2.75" w. (unframed). WDDCS394 |
|
|||
|
Production drawing of Mickey Mouse and Minnie Mouse The paper has had a tinge of color change around the outer edges only which can be easily matted out. There are two creases of 1.0" long across the upper right corner. The piece exhibits very slight signs of handling on the left and right sides and lower left corner which is common for this type of work. There are two miniscule tears of 0.12" in the far right peg hole. These can all be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 6.5" h x 5.5" w. (unframed). WDDCS317 |
|
|||
| 1939 | |||||
|---|---|---|---|---|---|
|
Production drawing of Pluto Piece exhibits slightly more than normal handling The size of this piece is 12 Field (11"x13") (unframed). WDDCS232 |
|
|||
|
Production drawing of Peg Leg Pete Lots of cool notes in red pencil! The paper has a very slight tinge of color change along the outer edges which can be easily matted out. As visible in the web image, there is a dark brown smudge located 3.0" to the left of the character. There are some slight creases along the right side which is common for studio-handled production material. The size of this piece is 12 Field (11"x13") and the character size is 5.5" h x 4.5" w. (unframed). WDDCS427 |
|
|||
|
Production drawing of Peg Leg Pete There is a slight crease of 5.5" running horizontally across the piece from the left edge located 2.25" below the upper left corner and there are very slight creases along the lower edge, lower left corner, and right side which is common for studio-handled production material. As visible in the web image, there is discoloration to the lower right corner, there is some evidence of light wear along the upper right edge and lower left peg hole; these can all be easily matted out. There are two tiny specks of discoloration; one 3.5" to the left of the character’s left shoulder and one halfway down and 0.5" from the right edge, these can be easily matted out. The size of this piece is 12 Field (11"x13") and the character size is 5.75" h x 5.25" w. (unframed). WDDCS428 |
|
|||
|
Production drawing of Peg Leg Pete The paper has a very slight tinge of color change along the outer edges which can be easily matted out. There are tears of 0.25" and 0.4" to the upper edge and located 2.75" to the right of the upper left corner; these can be easily matted out. There are some creases throughout which are common for studio-handled production material. As is visible in the web image, reinforcement tape has been affixed to the peg holes. The size of this piece is 12 Field (11"x13") and the character size is 5.5" h x 5.25" w. (unframed). WDDCS429 |
|
|||
|
Production drawing of Donald Duck and Peg Leg Pete The paper has a very slight tinge of color change along the outer edges which can be easily matted out. As visible in the web image, there is a tony fold across the lower left corner, a dark smudge at the upper left edge, and darker specks and areas of discoloration to the paper by the upper right edge and along the upper edge by the right corner; these can be easily matted out. There is a tear of 0.25" to the left edge and located 3.0" below the upper left corner, the right edge exhibits some wear and there is a 1.0" crease across the upper right corner; these can be easily matted out. There is a slight crease of 3.0" running diagonally and located 2.0" to the right of the character with some slight creases along the right side which is common for studio-handled production material. There are graphite markings 1.0" to the right of the character’s leg. The size of this piece is 12 Field (11"x13") and the character size is 6.75" h x 5.25" w. (unframed). WDDCS426 |
|
|||
|
Production drawing of Donald Duck The size of this piece is 12 Field (11"x13") (unframed). WDD1060 |
|
|||
|
Production drawing of Mickey Mouse and Pluto The size of this piece is 12 Field (11"x13") (unframed). WDDCS384 |
|
|||
 |  |
|
|
|
|
